Alcatel-Lucent 7710 SR OS Configuration Manual page 454

Show Commands
Filter ID Specified — When the filter ID is specified, detailed filter information for the filter ID
and its entries is produced. The following table describes the command output for the command.
Page 454
Label
Filter Id
Scope
Applied
Description
Label
MAC Filter The MAC filter policy ID.
Filter Id
Scope Template —
Exclusiv —
The IP filter policy description.
Description
Applied No —
Yes —
Def. Action Forward —
match the filter entries is to forward.
Drop —
the filter entries is to drop.
Filter Match MAC —
Criteria
The filter ID filter entry ID. If the filter entry ID indicates the entry is
Entry
(Inactive)
specified.
The filter entry description.
Description
FrameType Ethernet —
Ethernet II —
Src MAC The source MAC address and mask match criterion. When both the MAC
address and mask are all zeroes, no criterion specified for the filter entry.
The destination MAC address and mask match criterion. When both the
Dest MAC
MAC address and mask are all zeroes, no criterion specified for the filter
entry.
The IP filter ID
The filter policy is of type Template.
Template —
The filter policy is of type Exclusive.
Exclusiv —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The MAC filter policy description.
The filter policy is of type Template.
The filter policy is of type Exclusive.
The filter policy ID has not been applied.
The filter policy ID is applied.
The default action for the filter ID for packets that do not
The default action for the filter ID for packets that do not match
Indicates the filter is an MAC filter policy.
, then the filter entry is incomplete as no action has been
The entry ID match frame type is Ethernet IEEE 802.3.
The entry ID match frame type is Ethernet Type II.
7710 SR OS Router Configuration Guide
Description
Description