Alcatel-Lucent 7710 SR OS Configuration Manual page 403

Parameters
protocol — The protocol keyword configures an IP protocol to be used as an IP filter match
protocol-id — Configures the decimal value representing the IP protocol to be used as an IP filter
7710 SR OS Router Configuration Guide
criterion. The protocol type such as TCP or UDP is identified by its respective protocol number.
match criterion. Well known protocol numbers include ICMP(1), TCP(6), UDP(17). The no form
the command removes the protocol from the match criteria.
Values
0 — 255 (values can be expressed in decimal, hexidecimal, or binary - DHB)
keywords:
igmp, igp, ip, ipv6, ipv6-frag, ipv6-icmp, ipv6-no-nxt, ipv6-opts, ipv6-route, isis,
iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
Protocol Protocol ID
icmp 1
igmp 2
ip 4
tcp 6
egp 8
igp 9
udp 17
rdp 27
ipv6
41
ipv6-route 43
ipv6-frag 44
idrp 45
rsvp 46
gre 47
ipv6-icmp 58
ipv6-no-nxt
59
ipv6-opts
60
iso-ip 80
eigrp 88
ospf-igp 89
ether-ip 97
encap 98
pnni 102
none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp,
Description
Internet Control Message
Internet Group Management
IP in IP (encapsulation)
Transmission Control
Exterior Gateway Protocol
Any private interior gateway (used by Cisco for IGRP)
User Datagram
Reliable Data Protocol
IPv6
Routing Header for IPv6
Fragment Header for IPv6
Inter-Domain Routing Protocol
Reservation Protocol
General Routing Encapsulation
ICMP for IPv6
No Next Header for IPv6
Destination Options for IPv6
ISO Internet Protocol
EIGRP
OSPFIGP
Ethernet-within-IP Encapsulation
Encapsulation Header
PNNI over IP
Filter Policies
Page 403