Alcatel-Lucent 7710 SR OS Configuration Manual page 416

Parameters
match-list
Syntax
Context
Description
ip-prefix-list
Syntax
Context
Description
Default
Parameters
ip-prefix
Syntax
Context
Description
Page 416
true — Specifies matching on IP packets that have the SYN bit set in the control bits of the TCP
header.
false — Specifies matching on IP packets that do not have the SYN bit set in the control bits of the
TCP header.
match-list
config>filter
This command enables the configuration context for match lists to be used in Filter policies (IOM
and CPM).
ip-prefix-list ip-prefix-list-name create
no ip-prefix-list ip-prefix-list-name
config>filter>match-list
This command creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter policies.
The no form of this command deletes the specified list.
Operational notes:
An ip-prefix-list must contain only IPv4 address prefixes.
An IPv4 prefix match list cannot be deleted if it is referenced by a filter policy.
Please see general description related to match-list usage in filter policies.
none
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
ip-prefix ip-prefix/prefix-length
no ip-prefix ip-prefix/prefix-length
config>filter>match-list>ip-prefix-list
This command adds an IPv4 address prefix to an existing IPv4 address prefix match list.
The no form of this command deletes the specified prefix from the list.
Operational notes:
7710 SR OS Router Configuration Guide