Dual Esc Mixing "Dual Esc; Dual Esc - FUTABA T4PM Instruction Manual

Dual ESC Mixing "DUAL ESC"

2nd CH to control the front motor controller and the 4th CH to control the rear motor
controller.
Setting Special Mixes
cannot be used.
Display "
(HOME screen)
Dual ESC mixing adjustment
(Preparation)
- This function is used to switch between front
drive/4WD/rear drive using one of the trims (dial).
Set the desired trims (dial) for this function us-
ing the TRIM DIAL screen (page 90).
1
(Dual ESC setting)
Select the setting item "MODE" by moving the (JOG) button up
or down. Set the function by pressing the (+) or (-) button.
"INH"
" "
"
STR MIX function is not set to "INH".
"
CPS function is not set to "INH".
"
102
"
MENU-1
MENU-2
MENU-4
→
"
→ "
→ "
"INH".
Dual ESC Mixing "DUAL ESC"
(Throttle system)
(MENU 3)
Select

"DUAL ESC "

Setup items
MODE
RATE
MXMD
TRIM
Function TRIM DIAL
ESC-MD
Function ON/OFF (MODE)
INH, ACT
Select button
- Select with the (+) or (-) but-
tons.
(DUAL ESC screen)
: Function ON/OFF
: 4ch rate (Rear side)
: Mix mode
: Trim mode
The function select trim dial
screen (page 90) can be
displayed from this screen.