Security Levels - Canon Oce PlotWave 300 Administration Manual

Security levels

Security levels
Security levels presentation
Introduction
On Océ PlotWave 750 and Océ PlotWave 900 R2.x Océ defined 4 levels of security according to
the customer needs. The presentation below can help you to select the most suitable level
High and Medium-High security levels
The High and Medium-High levels are the most secure mode for printing and scanning.
The compliant applications are based on:
• the LPR protocol or HTTPS protocol for printing
• the FTP protocol for scanning.
Differences between High and Medium-High
• The Océ Printer Discovery (Océ UDP 515) is available only in Medium-High level (not in HIGH)
• WSD Print/WSD Discovery are present only in Medium-High level (for Océ PlotWave 750 only)
Target:
• These levels provides you the most secure mode while using the basic feature for printing and
scanning. Only some Océ applications are available. See the
application/functionality on page
• These security levels may also be used when you want to be protected whenever a
vulnerability has been discovered and the corresponding patch cannot be yet installed. As
soon as the patch can be installed, you can go back to the original security level.
NOTE
Attention when you set the Medium high or High security level through the HTTP protocol, the
communication immediately stops.
Open Océ Express Web Tools by means of the HTTPS protocol (type https://Printer IP address or
hostname in the web browser) and restart the system. Then use the HTTPS protocol.
Medium security level
The Medium level is compliant with all the Océ applications available for printing and scanning
which do not present a high risk (as reported by most popular network scanners).
Target:
This level is recommended if you need to be secured while you want to use the Océ applications
for printing and/or scanning (you can use the system including more functions than with the
HIGH and Medium-High security levels).
Normal security level
This mode offers all the functionalities.
Target:
• You can select this level if you want to use some features not covered by MEDIUM security
level.
• This level is more dedicated for small network infrastructure where security is less required
versus features.
72 Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
64.
security levels supported per