Canon Oce PlotWave 300 Administration Manual page 41

Illustration
IPsec parameters in the Océ Express WebTools (EWT)
The following IPsec parameters are available in the Océ Express WebTools :
IPsec Generic section:
IPSec
Enabled/Disabled
Failsafe option
Enabled/Disabled
Default preshared key
Other settings
* and HTTPS traffic for Océ Plotwave 900.
IPsec stations section:
You can configure a maximum of 5 IPsec communications between the printer/copier system and
5 workstations.
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
General setting to enable or disable IPsec.
Once enable, only the network traffic defined by the IPsec configuration
rules is authorised.
Keep this option enabled during the IPsec configuration, until the com-
plete and successful IPsec communication between the printer/copier
system and the configured station.
- When the option is Enabled (with IPsec enabled), only the network
traffic defined by IPsec configuration rules is authorised.
All other network traffic is denied except the HTTP traffic* for Océ Ex-
press WebTools with any workstation: this allows to change some IP-
sec settings via Océ Express WebTools, from any workstation.
- When the option is Disabled (with IPsec enabled): only the network
traffic defined by the IPsec configuration rules is authorised. All other
network traffic is denied.
You can define a default preshared key that will be used for all the sta-
tions connected by IPsec to the printer/scanner system.
You can display the other IPsec generic settings ('See all').
Keep them unchanged.
IPsec presentation
41