Canon Oce PlotWave 300 Administration Manual page 25

Applications, protocols and ports used in the Océ PlotWave 300, the Océ PlotWave 350, the Océ PlotWave 900 R1.x and Océ
Application /Function‐
ality
Océ Service Logic
IPsec
Océ Remote Meter
Reading Manager
Océ Remote Service
Notes:
• * Levels: N: Normal - M: Medium - H: High
•
(**)
The name resolution is mainly used to determine the IP address of the scan destination
during Scan fo File operation
•
(1)
FTP active mode only
•
(2)
Data channel for FTP passive mode
•
(3)
TCP/IP port 443 must be opened and must allow response back on the IT infrastructure
firewall.
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
System
Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
Océ PlotWave 300/
PlotWave 350
Océ ColorWave 300
Océ PlotWave 900
R1.2 and higher
Océ PlotWave 300/
PlotWave 350/ Plot-
Wave 900 R1.x
Océ ColorWave 300
Océ PlotWave 300
R1.5 and higher
PlotWave 350 R1.5
and higher
Océ PlotWave 900
R1.x
Océ ColorWave 300
R1.5 and higher
Supported security lev‐
els (x) and open port
N* M* H*
x
(1)
x
TCP 21
TCP 21
TCP
4242
x
UDP
500
UDP
4500
x
UDP
161
x x
ColorWave 300 systems
Port used on the
controller: protocol
TCP 21: FTP
(2)
TCP 4242: FTP
UDP 500
UDP 4500
UDP 161: SNMP
x HTTPS outgoing
connection required:
TCP/IP port 443
(3)
25