Canon Oce PlotWave 300 Administration Manual page 129

7. In the 'Authentication method' window, check 'Use this string to protect the key exchange
(preshared key)'
8. Enter the preshared key you set in Express WebTools (see
controller on page
9. Click 'Finish'
10. Click 'OK' to validate the Security rule
Assign the security policy
Procedure
1. In the console, right click on the security policy just created and select 'Assign'
The configuration is activated on the IPsec station (workstation):
120), then click 'Next'
Chapter 3 - Security on Océ PlotWave 500 and PlotWave 340/360
Assign the security policy
Configure the IPsec settings in the Océ
129