Canon Oce PlotWave 300 Administration Manual page 325

Steps
2- Open Océ Publisher
Select and connect to
a printer
3- Create a print job
Job submission with Océ WPD2
Steps
1- Log in on a work-
station
2- Open the applica-
tion to open the file.
3- Open Océ WPD2
(Properties) to print
the job from the appli-
cation
4- Change the user
name when needed
The user authentication in the main job submission workflows
Recommendations / Remarks
The user account name that the Océ Publisher Select application will
attach to the print job is:
• <user name>@<domain> if the domain is detected by the application
(example: 'user1@domain.com')
• <user name> if the domain is not detected (example: 'user1'). Which
is the case for instance when the user account is a local account on
the workstation.
NOTE
In Océ Publisher Select, the user account name cannot be
changed.
Recommendations / Remarks
Log in on the workstation with the same credentials as the ones you
will use to authenticate on the printer panel later on.
Example: 'user1' on domain 'domain.com'.
When the WPD2 driver window opens, check the user account name of
the job in the top right part of the window. This user name is going to
be sent along with the job.
Example: 'user1@domain.com'.
NOTE
If the user account name is not displayed, open the 'Options'
- 'Advanced options' window and check the option 'Require
user authentication' in 'Troubleshooting'.
In WPD2, you can change the user name of the owner of the job when
needed:
Click on the current user account name to edit it, and change it.
Important remark:
Make sure the new user name you select will be the one you will use
on the printer to access the jobs.
Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700 325