Canon Oce PlotWave 300 Administration Manual page 362

Assign the security policy
7. In the 'Authentication method' window, check 'Use this string to protect the key exchange
(preshared key)'
8. Enter the preshared key you set in Express WebTools (see
controller on page
9. Click 'Finish'
10. Click 'OK' to validate the Security rule
Assign the security policy
Procedure
1. In the console, right click on the security policy just created and select 'Assign'
The configuration is activated on the IPsec station (workstation):
362 Chapter 6 - Security on Océ ColorWave 500 and Océ ColorWave 700
120), then click 'Next'
Configure the IPsec settings in the Océ