Canon Oce PlotWave 300 Administration Manual page 123

3. Select 'IP Security Policy Management' and click 'Add' to add it to the root console
4. Keep 'Local computer' checked and click 'Finish'
The security snap-in is added, click 'OK'
Create the security policy
Procedure
1. In the console, right click on 'IP Security Policies on local Computer' and select 'Create IP Security
Policy'
2. Click 'Next' to open the wizard
Chapter 3 - Security on Océ PlotWave 500 and PlotWave 340/360
Create the security policy
123