Table of Contents
Advertisement
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp encapsulation snap
lldp fast-count
Use lldp fast-count to set the number of LLDP frames sent each time fast LLDP frame transmission
is triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 4.
Views
System view
Predefined user roles
network-admin
Parameters
count: Sets the number of LLDP frames sent each time fast LLDP frame transmission is triggered.
The value range is 1 to 8.
Examples
# Configure the device to send five LLDP frames each time fast LLDP frame transmission is
triggered.
<Sysname> system-view
[Sysname] lldp fast-count 5
lldp global enable
Use lldp global enable to enable LLDP globally.
Use undo lldp global enable to disable LLDP globally.
Syntax
lldp global enable
undo lldp global enable
Default
If the switch starts up with empty configuration, LLDP is disabled globally (initial setting).
If the switch starts up with the default configuration file, LLDP is enabled globally (factory default).
For more information about empty configuration and the default configuration file, see Fundamentals
Configuration Guide.
Views
System view
Predefined user roles
network-admin
274
Advertisement
Table of Contents
