Table of Contents
Advertisement
Line protocol state: UP (spoofing)
Description: NULL0 Interface
Bandwidth: 0kbps
Maximum transmission unit: 1500
Internet protocol processing: Disabled
Physical: NULL DEV
Last clearing of counters: Never
Last 300 seconds input rate:
Last 300 seconds output rate:
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
# Display brief information about interface Null 0.
<Sysname> display interface null 0 brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
NULL0
# Display brief information about interface Null 0, including the complete description of the null
interface.
<Sysname> display interface null 0 brief description
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
NULL0
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
For the command output, see
Related commands
•
interface null
•
reset counters interface null
interface loopback
Use interface loopback to create a loopback interface and enter loopback interface view.
Use undo interface loopback to remove a loopback interface.
Syntax
interface loopback interface-number
undo interface loopback interface-number
Default
No loopback interface exists.
Views
System view
0 bytes/sec, 0 bits/sec, 0 packets/sec
0 bytes/sec, 0 bits/sec, 0 packets/sec
Link Protocol Primary IP
UP
UP(s)
--
Link Protocol Primary IP
UP
UP(s)
--
Table 11
and
Table
48
Description
aaaaaaaaaaaaaaaaaaaaaaaaaaa
Description
aaaaaaaaaaaaaaaaaaaaaaaaaaaaa
12.
Advertisement
Table of Contents
