Display Storm-Constrain - HP FlexNetwork 5130 HI series Command Reference Manual

Layer 2 - lan switching
Table of Contents

Advertisement

storm-constrain command. Do not configure the storm constrain command and the
broadcast-suppression command at the same time. Otherwise, the traffic suppression result is not
determined.
When you configure the suppression threshold in kbps, the actual suppression threshold might be
different from the configured one as follows:
If the configured value is smaller than 64, the value of 64 takes effect.
If the configured value is greater than 64 but not an integer multiple of 64, the integer multiple of
64 that is greater than and closest to the configured value takes effect.
To determine the suppression threshold that takes effect, see the prompts on the device.
Examples
# Set the broadcast suppression threshold to 10000 kbps on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] broadcast-suppression kbps 10000
Related commands
multicast-suppression
unicast-suppression

display storm-constrain

Use display storm-constrain to display storm control settings and statistics.
Syntax
display storm-constrain [ broadcast | known-unicast | multicast | unicast ] [ interface
interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
broadcast: Displays broadcast storm control settings and statistics.
known-unicast: Displays known unicast storm control settings and statistics. This keyword is
available in Release 1121 and later.
multicast: Displays multicast storm control settings and statistics.
unicast: Displays unknown unicast storm control settings and statistics.
interface interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you do not specify any keywords, this command displays all storm control settings on all storm
control-enabled interfaces.
Examples
# Display the storm control settings on all storm control-enabled ports.
<Sysname> display storm-constrain
Abbreviation: BC - broadcast; MC - multicast; UC – unicast
28

Advertisement

Table of Contents
loading

Table of Contents