Mdix-Mode - HP FlexNetwork 5130 HI series Command Reference Manual

Flow Statistic Interval: 5 (in seconds)
Port
-------------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
GE1/0/3
GE1/0/4
GE1/0/5
Table 7 Command output
Field
Flow Statistic Interval
Port
Type
Lower
Upper
Unit
CtrlMode
Status
Trap
Log
SwitchNum

mdix-mode

IMPORTANT:
Fiber ports do not support this command.
KNUC – known unicast; FW - forwarding
Type Lower Upper
BC 12345 3456
MC 43 100
MC 100 200
UC 200 300
BC 500 1500
Description
Traffic polling interval (in seconds) of the storm control module.
Abbreviated port name.
Type of traffic subjected to storm control:
•
•
•
•
Lower storm control threshold, in pps, kbps, or percentage.
Upper storm control threshold, in pps, kbps, or percentage.
Storm control threshold unit:
•
•
•
Protective action (block or shutdown) taken on the port when the upper
threshold is reached. N/A indicates that no protective action is configured.
Packet forwarding status:
•
•
•
Status of the storm control threshold event trap switch:
•
•
Status of the storm control threshold event log switch:
•
•
Number of forwarding state changes of the interface.
When the SwitchNum count reaches 65535, it resets automatically.
Unit CtrlMode
pps block
ratio block
kbps shutdown
kbps shutdown
pps N/A
BC—Broadcast packets.
MC—Multicast packets.
UC—Unknown unicast packets.
KNUC—Known unicast packets.
pps.
kbps.
percentage.
FW—The port is forwarding traffic correctly.
shutdown—The port has been shut down.
block—The port drops the type of traffic.
on—The port sends threshold event traps.
off—The port does not send threshold event traps.
on—The port sends threshold event log messages.
off—The port does not send threshold event log messages.
29
Status Trap Log
FW on off
block on off
shutdown off on
normal off on
normal on on
SwitchNum
0
1
10
33
0