HP FlexNetwork 5130 HI series Command Reference Manual page 96

Usage guidelines
Static link aggregation groups are unaware of information about the peer groups. As a result, the
Partner ID field displays None or nothing for a static link aggregation group.
Examples
# Display brief information about all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
-------------------------------------------------------------------------------
BAGG1
BAGG10
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG
Interface
--------------------------------------------------------------------------------
RAGG10
BAGG20
Table 21 Command output
Field
Aggregation Interface Type
Aggregation Mode
Loadsharing Type
Actor System ID
AGG Interface
AGG Mode
Partner ID
AGG Partner ID
Mode
S none
D 0x8000, 000f-e267-57ad
AGG Partner ID
Mode
S None
D 0x8000,00e0-fcff-ff01
Description
Aggregate interface type:
•
•
Aggregation group type:
•
•
Load sharing type:
•
•
Local system ID, which contains the local system LACP priority and the local
system MAC address.
Type and number of the aggregate interface.
Aggregation group type.
System ID of the peer system, which contains the peer system LACP priority
and the peer system MAC address.
Selected
Ports
1
2
Selected
Ports
1
2
BAGG—Layer 2.
RAGG—Layer 3.
S—Static.
D—Dynamic.
Shar—Load sharing.
NonS—Non-load sharing.
88
Unselected Share
Ports Type
0 Shar
0 Shar
Unselected Individual
Ports Ports
0 0
0 0
Share
Type
NonS
Shar