Table of Contents
Advertisement
Table 43 Command output
Field
VLAN ID
Protocol index
Protocol type
Status
Related commands
•
display protocol-vlan vlan
•
port hybrid protocol-vlan
•
protocol-vlan
display protocol-vlan vlan
Use display protocol-vlan vlan to display information about protocol-based VLANs.
Syntax
display protocol-vlan vlan { vlan-id1 [ to vlan-id2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id1: Specifies a protocol-based VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN ID range. Both the vlan-id1 and the vlan-id2 arguments are in
the range of 1 to 4094. The value for the vlan-id2 argument must be equal to or greater than the
value for the vlan-id1 argument.
all: Specifies all protocol-based VLANs.
Examples
# Displays information about all protocol-based VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID: 2
Protocol index
0
65535
VLAN ID: 3
Protocol index
0
65535
Description
ID of the protocol-based VLAN.
Protocol template index.
Protocol type specified by the protocol template.
If you do not specify the protocol type, this field displays N/A.
Whether the protocol-based VLAN has taken effect:
•
Active—The protocol-based VLAN has taken effect.
•
Inactive—The protocol-based VLAN has not taken effect.
Protocol type
IPv4
IPv6
Protocol type
IPv4
LLC DSAP 0x11 SSAP 0x22
193
Advertisement
Table of Contents
