HP FlexNetwork 5130 HI series Command Reference Manual page 213

Layer 2 - lan switching
Table of Contents

Advertisement

GigabitEthernet1/0/2
VLAN ID: 4
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0004
Name: VLAN 0004
Tagged
ports: None
Untagged ports:
GigabitEthernet1/0/2
Table 47 Command output
Field
VLAN type
Private VLAN type
Route interface
IPv4 address
IPv4 subnet mask
IPv6 global unicast addresses
Description
Name
Tagged ports
GigabitEthernet1/0/3
GigabitEthernet1/0/4
Description
VLAN type: Dynamic or Static.
Private VLAN type:
Primary—Primary VLAN.
Secondary—Secondary VLAN.
Isolated secondary—Secondary VLAN configured with port
isolation at Layer 2.
Whether the VLAN interface is configured for the VLAN:
Configured.
Not configured.
Primary IPv4 address of the VLAN interface. This field is displayed only
when an IPv4 address is configured for the VLAN interface.
When the VLAN interface is also configured with secondary IPv4
addresses, you can view them by using one of the following commands:
display interface vlan-interface.
display this (VLAN interface view).
Subnet mask for the primary IPv4 address of the VLAN interface. This
field is displayed only when an IPv4 address is configured for the VLAN
interface.
Global unicast IPv6 address of the VLAN interface. This field is not
displayed when no IPv6 address is configured for the VLAN interface.
The IPv6 address states are as follows:
TENTATIVE—Initial state. DAD is being performed or is to be
performed on the address. An address in this state cannot be used
as the source address or destination address of packets.
DUPLICATE—DAD has been completed for the address. The
address is not unique on the link and cannot be used.
PREFERRED—The address is preferred and can be used as the
source or destination address of a packet. If an address is in this
state, the command does not display the address state.
DEPRECATED—The address is beyond the preferred lifetime but
within the valid lifetime. It is valid, but it cannot be used as the
source address for a new connection. Packets destined to the
address are processed correctly.
VLAN description.
VLAN name.
Tagged members of the VLAN.
205

Advertisement

Table of Contents
loading

Table of Contents