Table of Contents
Advertisement
Field
P0- P1- P2- P3- P4- P5- P6-
P7-
CoS map
CBS
Max TCs
TSA
Value of MBC
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN 12
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Power type
Power source
Description
Number of supported priorities configured by using the
priority-flow-control no-drop dot1p dot1p-list command on the
neighbor.
Application protocol-to-CoS mapping.
Indicates whether the token bucket mechanism is supported on
the port:
•
False—The token bucket mechanism is not supported.
•
True—The token bucket mechanism is supported.
Maximum number of priorities supported.
Transmission selection algorithm.
MBC indicates the ability of packets to bypass MACsec. It is 1-bit
long.
•
0—Packets can bypass MACsec when MACsec is disabled.
•
1—Packets cannot bypass MACsec when MACsec is
disabled.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 12.
Indicates whether autonegotiation is supported on the port.
Indicates whether autonegotiation is enabled on the port.
Speed and duplex state on the port.
PoE port class:
•
PSE—Power sourcing equipment.
•
PD—Powered device.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the pair selection ability is available.
Power supply mode:
•
Signal—Uses data pairs to supply power.
•
Spare—Uses spare pairs to supply power.
Power class of the PD:
•
Class 0.
•
Class 1.
•
Class 2.
•
Class 3.
•
Class 4.
This field appears only on the devices that support PoE.
PD type of an LLDP neighboring device that is a PD device:
•
Type 1 PD—Receives a power of 0 W to 15.4 W, a voltage of
44 V to 57 V, and a current of up to 350 mA.
•
Type 2 PD—Receives a power of 0 W to 30 W, a voltage of 50
V to 57 V, and a current of up to 600 mA.
This field appears only on the devices that support PoE.
260
Advertisement
Table of Contents
