HP FlexNetwork 5130 HI series Command Reference Manual page 50

Layer 2 - lan switching
Table of Contents

Advertisement

Syntax
display interface [ inloopback [ 0 ] ] [ brief [ description ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
0: Specifies interface Inloopback 0.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of interface descriptions. The description of an
inloopback interface is always InLoopBack0 Interface and cannot be configured.
Usage guidelines
If the inloopback keyword is not specified, the command displays information about all interfaces of
the device.
If the inloopback keyword is specified but the 0 keyword is not specified, the command displays
information about interface Inloopback 0. This is because the device has only one inloopback
interface Inloopback 0.
Examples
# Display detailed information about interface Inloopback 0.
<Sysname> display interface inloopback 0
InLoopBack0
Current state: UP
Line protocol state: UP (spoofing)
Description: InLoopBack0 Interface
Bandwidth: 0kbps
Maximum transmission unit: 1536
Physical: InLoopBack
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
Table 9 Command output
Field
Current state
Line protocol state
Description
Bandwidth
Description
Physical layer state of the interface, which is always UP, meaning
that the inloopback interface can receive and transmit packets.
Data link layer protocol state of the interface, which is always UP
(spoofing). UP (spoofing) means that the data link layer protocol
state of the interface is up, but the link is an on-demand link or is not
present.
Description string of the interface, which is always InLoopBack0
Interface and cannot be configured.
Expected bandwidth of the interface.
42

Advertisement

Table of Contents
loading

Table of Contents