Table of Contents
Advertisement
Examples
# Display IP subnet-based VLANs on GigabitEthernet 1/0/1.
<Sysname> display ip-subnet-vlan interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
VLAN ID
3
4
4094
Table 41 Command output
Field
VLAN ID
Subnet index
IP address
Subnet mask
Status
Related commands
•
display ip-subnet-vlan vlan
•
ip-subnet-vlan
•
port hybrid ip-subnet-vlan
display ip-subnet-vlan vlan
Use display ip-subnet-vlan vlan to display information about IP subnet-based VLANs.
Syntax
display ip-subnet-vlan vlan { vlan-id1 [ to vlan-id2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id1: Specifies an IP subnet-based VLAN by its VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN ID range. Both the vlan-id1 and the vlan-id2 arguments are in
the range of 1 to 4094. The value for the vlan-id2 argument must be equal to or greater than the
value for the vlan-id1 argument.
Subnet index
IP address
0
192.168.1.0
N/A
N/A
65535
172.16.1.1
Description
ID of the IP subnet-based VLAN.
Index of the IP subnet.
If no IP subnet-based VLAN is configured, this field displays N/A.
IP address of the subnet. It can be an IP address or a subnet address.
If no IP subnet address is configured for the VLAN, this field displays N/A.
Mask of the IP subnet.
If no subnet mask is configured for the VLAN, this field displays N/A.
Whether the IP subnet-based VLAN has taken effect on the port:
•
Active—The IP subnet-based VLAN has taken effect.
•
Inactive—The IP subnet-based VLAN has not taken effect. For example, this
field displays Inactive in one of the following conditions:
The configuration of the IP subnet-based VLAN is not complete.
The port does not allow the IP subnet-based VLAN.
Subnet mask
255.255.255.0
N/A
255.255.0.0
189
Status
Active
Inactive
Inactive
Advertisement
Table of Contents
