Table of Contents
Advertisement
Field
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Auto-negotiation supported
Auto-negotiation enabled
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Power type
Power source
Power priority
PD requested power value
PSE allocated power value
Media policy type
Description
Indicates whether link aggregation is supported on the port.
Indicates whether link aggregation is enabled on the port.
Member port ID, which is 0 when link aggregation is disabled.
Indicates whether autonegotiation is supported on the port.
Indicates whether autonegotiation is enabled on the port.
Speed and duplex state of the port.
PoE port class:
•
PSE—Power sourcing equipment.
•
PD—Powered device.
Indicates whether the device can operate as a PSE.
Indicates whether the device is operating as a PSE.
Indicates whether the PSE-PD pair control is available.
Power supply mode:
•
Signal—Uses data pairs to supply power.
•
Spare—Uses spare pairs to supply power.
Port power classification of the PD:
•
Class 0.
•
Class 1.
•
Class 2.
•
Class 3.
•
Class 4.
This field appears only on the devices that support PoE.
PoE device type is Type 2 PSE, which provides a power of 0 W to 30 W,
a voltage of 50 V to 57 V, and a current of up to 600 mA.
This field appears only on the devices that support PoE.
PSE power type:
•
Unknown—Unknown power supply.
•
Primary—Primary power supply.
•
Backup—Backup power supply.
•
Reserved.
This field appears only on the devices that support PoE.
PoE power supply priority of PSE ports:
•
Unknown.
•
Critical.
•
High.
•
Low.
This field appears only on the devices that support PoE.
Power (in watts) that the PD requests.
This field appears only on the devices that support PoE.
Power (in watts) that the PSE provides to the PD.
Media policy type:
•
unknown.
•
voice.
•
voiceSignaling.
253
Advertisement
Table of Contents
