Installation By Din Rail - Mitsubishi Electric MR-J4W2-0303B6 Instruction Manual

18. MR-J4W2-0303B6 SERVO AMPLIFIER

18.2.2 Installation by DIN rail

CAUTION
The following explains mounting and removing procedure of servo amplifier using DIN rail.
Mounting servo amplifier to DIN rail
1) Pull down the hook.
3) Push up the hook, and fix the servo amplifier.
To mount the servo amplifier to DIN rail, pull down the tab of hook. The hook may
come off when the tab is pushed down from the back side of the servo amplifier.
Hook
Wall
Upper tab
DIN rail
Hook
2) Hang the upper tab on the back of the servo amplifier
to the upper tab of DIN rail, and push toward to the
wall.
18 - 13
Wall
Upper tab
DIN rail