Junction Terminal Block Mr-Tb26A - Mitsubishi Electric MR-J4W2-0303B6 Instruction Manual

11. OPTIONS AND PERIPHERAL EQUIPMENT

11.12 Junction terminal block MR-TB26A

(1) Usage
Always use the junction terminal block (MR-TB26A) with the option cable (MR-TBNATBL_M) as a set.
To use a junction terminal block, mount it to the DIN rail.
Terminal numbers on a junction terminal block correspond with the pin numbers on the CN3 connector
of a servo amplifier. The terminal symbol S is for the shield.
Ground the junction terminal block cable using the S terminal of the junction terminal block.
(2) Specifications
M R - T B N A T B
Servo amplifier
CN3
Junction terminal block
Item
Rating
Stranded wire
Usable cables Solid wire
Wire insulator OD
Tool
Stripped length
11 - 45
L 0 5 M
Cable length
05: 0.5 m
1: 1 m
Junction terminal block cable
(MR-TBNATBL_M)
0.08 mm
210-619 (WAGO) or equivalent
210-119SB (WAGO) or equivalent
Junction terminal block
MR-TB26A
MR-TB26A
32 V AC/DC 0.5 A
2 to 1.5 mm 2 (AWG 28 to 14)
φ0.32 mm to 1.2 mm
φ3.4 mm or less
5 mm to 6 mm