Operation By Controller Command - Mitsubishi Electric MELSERVO-JET MR-JET-G-N1 Series User Manual

Operation by controller command

Confirm that the servo motor operates correctly under the commands from the controller. Give a low-speed command at first
and check the rotation direction, etc. of the servo motor. If the servo motor does not operate in the intended direction, check
the input signal.
1.
Open the batch display screen in MR Configurator2. Confirm that there is no error in the items such as servo motor
speed and load ratio.
2.
Open the I/O monitor screen. Confirm that there is no error in the I/O signal.
4 STARTUP
32
4.1 Switching power on for the first time