Switch Setting And Display Of The Servo Amplifier - Mitsubishi Electric MR-J4W2-0303B6 Instruction Manual

18. MR-J4W2-0303B6 SERVO AMPLIFIER

18.5 Switch setting and display of the servo amplifier

Switching to the test operation mode, deactivating control axes, and setting control axis No. are enabled with
switches on the servo amplifier.
On the servo amplifier display (three-digit, seven-segment LED), check the status of communication with the
servo system controller at power-on, and the axis number, and diagnose a malfunction at occurrence of an
alarm.
The control axis setting switches of MR-J4W2-0303B6 servo amplifier are aligned vertically unlike other MR-
J4 2-axis servo amplifiers; however, the use of each number switch is the same.
The items in the following table are the same as those for MR-J4W2-_B and MR-J4W3-_B servo amplifiers.
Refer to the section of the detailed explanation field for details.
Application
1 Test operation select switch
2 Disabling control axis switch for A-axis
3 Disabling control axis switch for B-axis
4 For manufacturer setting
5 Auxiliary axis number setting switch
6 Auxiliary axis number setting switch
Item
Switches
Scrolling display
Status display of an axis
18 - 44
Detailed explanation
Section 4.3.1
Section 4.3.2
Section 4.3.3