Step
2.
Enter BGP IPv4 unicast
address
family
BGP-VPN
IPv4
address family view, or BGP
IPv4 multicast address family
view.
3.
Save all route updates from
the peer or peer group.
To save all route updates from the specified peer or peer group (IPv6 unicast address family):
Step
1.
Enter system view.
2.
Enter BGP IPv6 unicast
address
family
BGP-VPN
IPv6
address family view.
Command
•
Enter
address family view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
•
Enter BGP-VPN IPv4 unicast
address family view:
c. bgp
[
view,
instance-name
unicast
[ multi-session-thread ]
d. ip
vpn-instance-name
e. address-family
[ unicast ]
•
Enter BGP IPv4 multicast
address family view:
f. bgp
[
instance-name
[ multi-session-thread ]
g. address-family
multicast
peer { group-name | ipv4-address
[ mask-length ] } keep-all-routes
Command
system-view
•
Enter
address family view:
a. bgp
[
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
•
view
or
Enter BGP-VPN IPv6 unicast
unicast
address family view:
c. bgp
[
instance-name
[ multi-session-thread ]
d. ip
vpn-instance-name
e. address-family
[ unicast ]
271
BGP IPv4
unicast
as-number
instance
]
ipv4
as-number
instance
]
vpn-instance
ipv4
as-number
instance
]
ipv4
BGP IPv6
unicast
as-number
instance
]
ipv6
as-number
instance
]
vpn-instance
ipv6
Remarks
N/A
By default, the routes are not
saved.
This command takes effect only
for the routes received after this
command is executed.
Remarks
N/A
N/A