HP FlexFabric 12900E Series Configuration Manual page 468

Switch A and Switch B are Level-1 switches, Switch D is a Level-2 switch, and Switch C is a
Level-1-2 switch.
Figure 107 Network diagram
Switch A
Vlan-int100
2001:1::2/64
Vlan-int100
2001:1::1/64
Vlan-int200
2001:2::1/64
Vlan-int200
2001:2::2/64
Switch B
L1
Configuration procedure
1. Configure IPv6 addresses for interfaces. (Details not shown.)
2. Configure IPv6 IS-IS:
# Configure Switch A.
<SwitchA> system-view
[SwitchA] isis 1
[SwitchA-isis-1] is-level level-1
[SwitchA-isis-1] network-entity 10.0000.0000.0001.00
[SwitchA-isis-1] address-family ipv6
[SwitchA-isis-1-ipv6] quit
[SwitchA-isis-1] quit
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] isis ipv6 enable 1
[SwitchA-Vlan-interface100] quit
# Configure Switch B.
<SwitchB> system-view
[SwitchB] isis 1
[SwitchB-isis-1] is-level level-1
[SwitchB-isis-1] network-entity 10.0000.0000.0002.00
[SwitchB-isis-1] address-family ipv6
[SwitchB-isis-1-ipv6] quit
[SwitchB-isis-1] quit
[SwitchB] interface vlan-interface 200
[SwitchB-Vlan-interface200] isis ipv6 enable 1
[SwitchB-Vlan-interface200] quit
# Configure Switch C.
<SwitchC> system-view
[SwitchC] isis 1
[SwitchC-isis-1] network-entity 10.0000.0000.0003.00
[SwitchC-isis-1] address-family ipv6
[SwitchC-isis-1-ipv6] quit
[SwitchC-isis-1] quit
L1
Vlan-int300
2001:3::1/64
Vlan-int300
2001:3::2/64
Switch C
L1/L2
Area 10
Vlan-int301
2001:4::1/64
Switch D
L2
Area 20
456