HP FlexFabric 12900E Series Configuration Manual page 217

Tasks at a glance
(Optional.) Configuring BGP FRR
(Optional.) Configuring BGP LS
To configure BGP, perform the following tasks (IPv6 unicast):
Tasks at a glance
Configuring basic BGP:
•
(Required.) Enabling BGP
•
(Required.) Perform one of the following tasks:
Configuring a BGP peer

Configuring dynamic BGP peers

Configuring a BGP peer group

•
(Optional.) Specifying the source address of TCP connections
Perform at least one of the following tasks to generate BGP routes:
•
Injecting a local network
•
Redistributing IGP routes
(Optional.) Controlling route distribution and
•
Configuring BGP route summarization
•
Advertising optimal routes in the IP routing table
•
Advertising a default route to a peer or peer group
•
Limiting routes received from a peer or peer group
•
Configuring BGP route filtering policies
•
Configuring BGP route dampening
(Optional.) Controlling BGP path
•
Setting a preferred value for routes received
•
Configuring preferences for BGP routes
•
Configuring the default local preference
•
Configuring the MED attribute
•
Configuring the NEXT_HOP attribute
•
Configuring the AS_PATH attribute
•
Configuring the SoO attribute
reception:
selection:
205
Remarks
BGP does not support
FRR for IPv4 multicast
routes.
N/A
Remarks
As a best practice,
configure BGP peer
groups on large scale
BGP networks for easy
configuration and
maintenance.
N/A
N/A
N/A