HP FlexFabric 12900E Series Configuration Manual page 257

Step
2. Enter BGP IPv6 unicast
address
BGP-VPN
address family view.
3. Configure the default MED
value.
Enabling MED comparison for routes from different ASs
This task enables BGP to compare the MEDs of routes from different ASs.
To enable MED comparison for routes from different ASs:
Step
1. Enter system view.
2. Enter BGP instance view or
BGP-VPN instance view.
3. Enable MED comparison for
routes from different ASs.
Enabling MED comparison for routes on a per-AS basis
This task enables BGP to compare the MEDs of routes from an AS.
Command
•
•
family view or
IPv6 unicast
default med med-value
Command
system-view
•
•
compare-different-as-med
Enter BGP IPv6 unicast
address family view:
a. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
b. address-family
[ unicast ]
Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
d. ip vpn-instance
vpn-instance-name
e. address-family
[ unicast ]
Enter BGP instance view:
bgp as-number [ instance
instance-name
[ multi-session-thread ]
Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name
[ multi-session-thread ]
b. ip vpn-instance
vpn-instance-name
245
Remarks
]
ipv6
N/A
]
ipv6
The default MED value is 0.
Remarks
N/A
]
N/A
]
By default, MED comparison for
routes from different ASs is
disabled.