Configuring Ipv6 Is-Is Route Control - HP FlexFabric 12900E Series Configuration Manual

Configuring IPv6 IS-IS route control

Before you configure IPv6 IS-IS route control, complete basic IPv6 IS-IS configuration.
To configure IPv6 IS-IS route control:
Step
1. Enter system view.
2. Enter IS-IS view.
3. Enter IS-IS IPv6 address
family view.
4. Specify a preference for
IPv6 IS-IS routes.
5. Configure an IPv6 IS-IS
summary route.
6. Configure IPv6 IS-IS to
advertise a default route.
7. Configure IPv6 IS-IS to
filter redistributed routes.
8. Configure IPv6 IS-IS to
filter received routes.
9. Configure IPv6 IS-IS to
redistribute routes from
another routing protocol.
10. Configure the maximum
number of redistributed
Level
routes.
11. Configure
advertisement
Level-2 to Level-1.
12. Configure
advertisement
Level-1 to Level-2.
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
address-family ipv6 [ unicast ]
preference
route-policy-name | preference } *
summary
[
generate_null0_route | [ level-1 |
level-1-2 | level-2 ] | tag tag ] *
default-route-advertise
[ avoid-learning | [ level-1 | level-1-2 |
level-2
route-policy-name | tag tag ] *
filter-policy
prefix-list
route-policy
export [ protocol [ process-id ] ]
filter-policy
prefix-list
route-policy
import
import-route protocol [ as-number |
process-id
[ allow-direct | cost cost-value |
[ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name | tag
tag ] *
import-route limit number
1/Level 2 IPv6
import-route
route
level-1 [ filter-policy { ipv6-acl-number
from
|
route-policy route-policy-name } | tag
tag ] *
import-route
route
level-2 [ filter-policy { ipv6-acl-number
from
|
route-policy route-policy-name } | tag
tag ] *
{ route-policy
ipv6-prefix prefix-length
avoid-feedback
route-policy
] |
{ ipv6-acl-number
prefix-list-name
route-policy-name
{ ipv6-acl-number
prefix-list-name
route-policy-name
] [ allow-ibgp
isisv6 level-2
prefix-list
prefix-list-name
isisv6 level-1
prefix-list prefix-list-name
447
Remarks
N/A
N/A
N/A
By default, the default setting is
15.
| By default, no
summary route is configured.
By default, IPv6 IS-IS does not
advertise Level-1 and Level-2
default routes.
By default, IPv6 IS-IS does not
|
filter redistributed routes.
|
This command is usually used
}
together with the import-route
command.
|
| By default, IPv6 IS-IS does not
} filter received routes.
]
By default, IPv6 IS-IS does not
redistribute routes from any
other routing protocol.
By default, the
number of redistributed Level
1/Level 2 IPv6 routes is not
configured.
into
By default, IPv6 IS-IS does not
| advertise routes from Level-2 to
Level-1.
into
By default,
| advertises routes from Level-1
to Level-2.
IPv6 IS-IS
maximum
IPv6 IS-IS