Additional Logins; Automatic Login - Avaya 1220 User Manual

Multiuser
You can configure up to five profiles. If the limit is exceeded, then the least recently used profile is
automatically deleted.
Related links
Multiuser on page 143

Additional logins

on page 144

Automatic login

on page 144
Additional logins
The Login command in the System menu allows you to register additional accounts.
Note:
You cannot change the language in a secondary login.
You can specify the Line Key to which the new account is associated. By default, the first unused
key is selected. If the configured limit is reached on concurrent logins, then the selected login
command displays an error message.
The initial login message login in process displays during the login operation.
During the login process, the IP Deskphone can receive calls for user accounts that are already
registered; however, other features are not available until the login process is complete.
No profile selection prompt is displayed for the secondary account and no profile is created.
Related links
Initial login on page 143
Automatic login
If the automatic login feature is enabled and you were logged in when the IP Deskphone was
switched off, the IP Deskphone automatically logs you back in upon startup. If multiple users were
logged in, then they are all logged back in one after the other.
If the automatic login feature is disabled, then the automatic login does not occur.
It is possible to provision the IP Deskphone with user credentials for automatic login even on the
initial startup. With the addition of multiuser support, it is also possible to provision multiple accounts
in the same way. For more information about different autologin scenarios, see
logout on page 145.
Related links
Initial login on page 143
May 2016 Avaya 1220 IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Primary account
®
User Guide 144