Avaya 1220 User Manual page 131

If a user-defined password is not allowed, then the Set soft key is not visible, and you can
use only the primary user login password to enable the password–protected screensaver.
2. Enter a password. Press the abc/123 soft key to toggle input mode between numeric or
alphabet.
3. Press OK. A Screensaver enabled message appears if the password is valid. An
Invalid password message is displayed if the password is invalid.
Press Back to dismiss the Enable (with password) mode menu.
Active Screensaver
After the screensaver is enabled, and if the IP Deskphone is idle for the defined delay/time interval,
then the screensaver takes control of the IP Deskphone.
If Reboot performed while screensaver is displayed
If you reboot the IP Deskphone when there is an active screensaver:
• If you have enabled autologin, then the screensaver remains active after the IP Deskphone
reboots and completes the login.
• If you have not enabled autologin, then the screensaver setting remains enabled, but not
active, after you log back into the IP Deskphone manually.
Active Screensaver (no password mode)
Any user interaction, key presses, mouse movement, or incoming call cancels the screensaver
(without requiring a user password). This includes pressing the Unlock soft key.
Incoming IMs do not cancel the screensaver.
The programmed keys of attached Expansion Module(s) are cleared until the screensaver is
deactivated. If you have logged on to the IP Deskphone, you are not logged out, but the line key
labels clear and are inactive until the screensaver is deactivated.
Active Screensaver (password mode)
If the screensaver is in a password–protected mode, pressing the Unlock soft key invokes a
password input screen. The password must be correctly entered to cancel the screensaver.
User interaction, key presses, and mouse movements do not cancel the screensaver.
Pressing the Unlock soft key prompts you to enter the password for the screensaver. The primary
user line key is displayed (but not active) during the password prompt to give an indication about
whose password is in use.
Picking up the handset and dialing digits activates the line function display for emergency calls only.
If you try to place an outgoing call, a message is displayed and the screensaver starts again.
If you make an emergency call while the screensaver is active, the call is placed using the primary
user.
An incoming call displays caller ID and allows you to answer the call. The Unlock soft key appears
on the screen and you can unlock the IP Deskphone after answering the call. You cannot make
outgoing calls except an emergency call, and cannot view IMs or the Friends list until you unlock the
IP Deskphone.
If you make an emergency call while the screensaver is active, the call is placed using the primary
user.
May 2016 Avaya 1220 IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
Screensaver/screen lock
®
User Guide 131