Avaya 1220 User Manual page 130

Advanced features
The following items are displayed:
• Mode — to enable or disable the screensaver and choose if the screensaver is to be password
protected.
• Delay — to configure the time delay before the screensaver is invoked.
• Text — to configure the text that appears on the phone display screen when the screensaver is
active.
Press Select to select the currently highlighted setting.
Press Back to exit the Screensaver menu.
Mode
The Screensaver Mode screen allows you to enable or disable the screensaver/lock.
Choose one of the following screensaver configuration options:
1. Disable — to the disable the screensaver.
2. Enable (no password) — to enable the screensaver with password-free mode.
3. Enable (with password) — to enable the screensaver with password mode.
Press Select to select the currently highlighted setting.
Press Back to exit the Screensaver Mode menu.
Note:
Some options may not appear, depending on configuration.
Disable:
Disabling the Screensaver displays a message confirming your selection.
Enable (no password):
Enabling the screensaver in No Password mode displays a message confirming your selection.
Note:
If the device configuration does not allow the use of a password-free screensaver, this menu
option is not available to you.
Enable (with password):
Enabling the screensaver in password-protected mode prompts you to enter a password before
logging in.
If allowed in the configuration, the user-defined password definition screen is displayed.
The screen displays Enter user password to activate screensaver followed by a user-
input prompt.
To configure a password:
1. Press the Set soft key.
This soft key appears only if the phone configuration allows the setting of user-defined
passwords. Pressing this key invokes a password definition screen that allows you to
configure a password.
May 2016 Avaya 1220 IP Deskphone with SIP Software on Avaya Aura
Comments on this document? infodev@avaya.com
®
User Guide 130