Additional Logins; Automatic Login - Avaya 1165E User Manual

Multiuser

Automatic login

Additional logins

The Login command in the System menu allows you to register additional accounts.
Note:
You cannot change the language in a secondary login.
The following figure shows the secondary login screens.
Figure 41: Secondary Login screens
You can specify the line key to which the new account is associated. By default, the first unused
key is selected. If the configured limit is reached on concurrent logins, then the selected login
command displays an error message.
The initial login message Logging in user displays during the login operation.
During the login process, the IP Deskphone can receive calls for user accounts that are already
registered; however, other features are not available until the login process is complete.
No profile selection prompt is displayed for the secondary account and no profile is created.
Automatic login
If the automatic login feature is enabled and you were logged in when the IP Deskphone was
switched off, the IP Deskphone automatically logs you back in upon startup. If multiple users
were logged in, then they are all logged back in one after the other.
If the automatic login feature is disabled, then the automatic login does not occur.
It is possible to provision the IP Deskphone with user credentials for automatic login even on
the initial startup. With the addition of multiuser support, it is also possible to provision multiple
214 Avaya 1165E IP Deskphone with SIP Software User Guide
on page 214
Comments? infodev@avaya.com
November 2013