Table of Contents
Advertisement
EAN7360 / EHN7360 / EZN7360
7.1.8. Serial Communication
The function is currently reserved.
Baud Rate: This field is to set the speed at which is used to transmit instruction or information
through the RS-485 port on the video encoder.
Data Bit: This field is the data bit at which you will be transferring.
Stop Bit: This field is to set the stop bit for the RS-485 connection. There are two different stop bits,
1 or 2.
Parity: This field is to select the parity level at which you will be connected. You can choose
between None, Odd, Even, Mark or Space parity levels.
Flow Control: Select a flow control type from the drop-down list.
After complete the settings, click Save to apply the changes.
51
Advertisement
Table of Contents
