7.1.3. PTZ Setting
You can set up the serial communication, or schedule PTZ tasks for each day.
7.1.3.1.
Serial Setting
Use this page to configure the serial communication parameters.
Address: select the camera's address.
Baud Rate: select the camera's baud rate (transmission speed).
Protocol: select the communication protocol.
Click the Save button on the bottom-right to save the settings.
7.1.3.2.
Schedule Task
Use this page to configure a schedule for performing Preset / Tour / Pattern / Area during the
specified day and time.
To add a schedule PTZ task:
1. Check the Enable box to enable the Schedule Task function.
2. Set up the interval between the tasks, from 5 to 3600 seconds, in the Task Restart field.
35
EPN5230 / EPN5210