Table of Contents
Advertisement
7.1.9. Serial Communication
This function can only be set up in the Advanced tab.
【RS485 Setting】
Baud Rate: This field is to set the speed at which is used to transmit instruction or information
through the RS-485 port on the video encoder. There are six different speeds, 2400 / 4800 / 9600 /
19200 / 38400 / 57600.
Data Bit: This field is the data bit at which you will be transferring.
Stop Bit: This field is to set the stop bit for the RS-485 connection. There are two different stop bits,
1 or 2.
Parity: This field is to select the parity level at which you will be connected. You can choose
between None, Odd, or Even parity levels.
【Server Setting】
To set up server for data transmission, enter IP Address, Username and Password and check the
Enable box. Click Apply to save your settings.
47
EZN7221/7260/7360
Advertisement
Table of Contents
