System Information - EverFocus EAN7360 User Manual

EAN7360 / EHN7360 / EZN7360

7.1.6. System Information

You can check the system information or set up system setting on this page.
Device Name: If required, enter a desired name for the machine. This name will be visible in the
Machine Name field of the IP Utility software.
Model Name: Display the model name of the camera. The values cannot be changed on this page.
Format: Select NTSC (60Hz) or PAL (50Hz) as video output format.
Language: Select the preferred system language.
Firmware Version: Display the current firmware version. The values cannot be changed on this
page.
Web Interface Version: Display the current web interface version. The values cannot be changed on
this page.
Note:
1. Modifying the Format will cause the system to reboot automatically. Please create a new
network connection to the IP camera when the reboot is complete.
2. Please connect the camera again after modifying the language.
After complete the settings, click Save to apply the changes.
49