Table of Contents
Advertisement
EAN7360 / EHN7360 / EZN7360
7.3.2. Notification
7.3.2.1.
Email Settings
This area is for configuring the mail server that is used to send e-mail notifications from the
camera to predefined addresses via SMTP. Note that to enable e-mail notification function, you
have to check the Email box of each alarm function (see
7.3.1
Event).
Receiver Address: Input the e-mail addresses for receiving an e-mail message when events occur.
You can select an email service provider from the drop-down list or select Other then enter a
domain name. To go back to the drop-down list again, click the left-arrow
button.
Sender Settings: Check the box to configure the e-mail sender settings. You can select an email
service provider from the drop-down list or select Other then enter a domain name. To go back
to the drop-down list again, click the left-arrow
button.
Sender Address: Input the sender's e-mail address, so that the receiver can recognize the sender
when an event message is received.
Password: Input the user's login password if the SMTP server requires authentication.
Email Title: Enter a title for the e-mail notification.
SMTP Port: Enter the port numbers for SMTP. The default port is 25.
69
Advertisement
Table of Contents
