Storage - EverFocus EAN7360 User Manual

Time Zone: Select the time zone of the camera's location.
NTP Server: Enter the Network Time Protocol server, if applicable. The camera's time will be
automatically adjusted by synchronizing with the NTP server.
NTP Port: Enter the Network Time Protocol port. The default port is 123.
Synchronize with PC: Select to automatically adjust camera's time by synchronizing with the

PC.
Manually Input Date and Time: Select to enter the desired date and time in the Date fields.

After complete the settings, click Save to apply the changes.

7.1.3. Storage

You can check the SD Card utility or format the SD Card using this page.
Micro SD Card Information: If a micro SD card has been inserted to the micro SD card slot of the
camera, the micro SD card information will be displayed in this field, such as capacity, available free
space and status.
Format: For the first-time user, click to format the card. All data saved on the micro SD card will

be removed if the card is formatted.
Refresh: Click the button when the micro SD card is not detected and the camera will detect

the micro SD card again.
Stream Type: You can specify the stream type from main stream or sub stream for the recording /
snapshot.
Record Time: You can limit the size of each file recorded to the micro SD card (in minutes).
After complete the settings, click Save to apply the changes.
45
EAN7360 / EHN7360 / EZN7360