EAN7360 / EHN7360 / EZN7360
SSL: Check the box to enable the SSL function. Enable this function means you can access the
camera through the SSL protocol that provides communication security over the Internet.
After complete the settings, click Save to apply the settings.
7.3.2.2.
FTP Settings
This area is for configuring the FTP server that is used to send recordings and snapshots from the
camera to the preconfigured FTP server. Note that to enable uploading to the FTP server function,
you have to check the FTP box of each alarm function (see
7.3.1
Event). You can condfigure up to
two FTP servers, if the system fails to connect the primary FTP server, it will connect the
secondary FTP server.
FTP Server: Enter the IP address or the host name of the FTP server.
FTP Port: Enter the port numbers for the FTP server.
FTP Path: Assign the recording path.
70