Table of Contents
Advertisement
To set up privileges for a user account:
1. Click the Authority button in the Operation column. The following dialog box appears.
2. Check the box to grant the privileges to this user account.
3. Click Save to save all the settings.
After complete the settings, click Save to apply the changes.
7.1.8. Serial Communication
The function is currently reserved.
Protocol: Select a protocol from Pelco-D or Pelco-P.
Address: Enter the address from 0 to 255.
Baud Rate: This field is to set the speed at which is used to transmit instruction or information
through the RS-485 port (reserved) on the video encoder. There are six different speeds, from 50 to
115200.
After complete the settings, click Save to apply the changes.
Value IP 2MP 288 Series / 3MP 368 Series
46
Advertisement
Table of Contents
