Table of Contents
Advertisement
7.2.1.4. ROI Settings
The Region of Interest (ROI) function allows you to set up multiple regions within an image with
better quality and less distortion than the rest of the image. You can also use this function
together with the Digital Zoom function on the Live View window to get a better image result. Up
to four ROIs can be configured in this field.
To set up an ROI region:
1. Click the ROI button on the left-side then select a quality value for the ROI from the ROI
Quality drop-down list.
2. Click the Set ROI button on the left-side.
3. Click the Draw ROI button. On the preview window, move the cursor to the position where
you want the ROI rectangle to start and then click it. Move the cursor to the position
(diagonally opposing corner) where you want the ROI rectangle to end and then click it.
4. You can remove the configured region by clicking the Clear button.
After complete the settings, click Save to apply the settings.
57
EAN7360 / EHN7360 / EZN7360
Advertisement
Table of Contents
