Table of Contents
Advertisement
4.4. Basic Installation
Follow the steps below for mounting and wiring the camera.
EAN7360
You can install either a CS-Mount or a C-Mount lens into the camera. It is recommended to use a lens
with aperture ratio of F/1.2 or smaller. Please refer to the following reference steps.
C-Mount Lens Adapter
DC Auto Iris Lens Connector
Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera sensor.
If you are using a DC Auto Iris lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Connect the DC cable to the DC Auto Iris Lens Connector.
4.
When making final focus adjustment, place the ND filter (not supplied in the package) in front of
the lens to force the lens iris to open, and then adjust the lens using the Focus / Zoom Screws.
5.
Lock the Focus Screw and then remove the ND filter.
CS-Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Adjust the lens using the Focus / Zoom crews.
C-Mount Lens:
Focus Screw
1.
Remove the cover cap from the camera body.
Zoom Screw
2.
Install the lens into the camera body using the
supplied C-mount lens adapter.
3.
Adjust the lens using the Focus / Zoom Screws.
12
EAN7360 / EHN7360 / EZN7360
Advertisement
Table of Contents
