EAN7360 / EHN7360 / EZN7360
entered in the Receiver Address field (see
7.3.2.1 Email
Settings).
Update Interval: Select an interval for the IP mail notification. If you select Default, system will
send a notification once the PPPoE IP is changed.
Out-of-Focus Detection
Enable Out-of-Focus Detection: Click the button to enable the out-of-focus detection function.
Enable Output Alarm: Click the button to enable triggering the OSD alarm.
Out-of-Focus + Motion Detection: Click the button if you want the event reaction to be triggered
only when both motion and out-of-focus are detected.
After complete the settings, click Save to apply the settings.
7.3.1.5. Continuous
You can configure the recording and snapshot schedule using the page.
Snapshot
To set up a snapshot schedule:
1. Input the interval time for the system to take a snapshot in the Snap Interval field.
2. Set up schedules to active the schedule snapshot function. Check the box of the desired
section to configure the schedule, and enter a start / end time in the fields for the section.
3. Specify to save the snapshots to Email or FTP server.
67