Table of Contents
Advertisement
7.2.1.3. Privacy Mask Settings
The Privacy Mask can block out sensitive areas from view, covering the areas with black boxes in
both live view and recorded clips. This feature is useful when you don't want the sensitive
information visible. Up to four Privacy Masks can be configured.
To set up a Privacy Mask:
1. Check the Enable Mask box to enable the Privacy Mask function.
2. Click the Draw Mask Area button. On the preview window, move the cursor to the position
where you want the mask rectangle to start and then click it. Move the cursor to the position
(diagonally opposing corner) where you want the mask rectangle to end and then click it.
3. You can cover the whole image by clicking the Select All button.
4. You can remove the configured mask by clicking the Clear button.
After complete the settings, click Save to apply the settings.
56
EAN7360 / EHN7360 / EZN7360
Advertisement
Table of Contents
