The User Account Screen - ZyXEL Communications LTE3202-M430 User Manual

The following table describes the labels in this screen.
Table 46 System > System Information
LABEL
General Information
System name
Domain name
Inactivity timer
S/N
FW Version
Apply
Reset

14.3 The User Account Screen

This screen allows you to set the domain name and change the LTE3202-M430's system password. It is
strongly recommended that you change your LTE3202-M430's system password. To access this screen,
click Maintenance > User Account.
See Section 2.2 on page 14
Figure 67 Maintenance > User Account
The following table describes the labels in this screen.
Table 47 System > User Account
LABEL
User Settings
Username
Password
Confirm Password
Apply
Reset
Chapter 14 System
DESCRIPTION
System name is a unique name to identify the LTE3202-M430 in an Ethernet network.
Enter the domain name you want to give to the LTE3202-M430.
Type how many minutes a management session can be left idle before the session times out.
The default is 300 seconds. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management session never
times out, no matter how long it has been left idle (not recommended).
This displays the serial number of the LTE3202-M430.
This displays the current firmware version of the LTE3202-M430.
Click this button to save your changes back to the LTE3202-M430.
Click Reset to reload the previous configuration for this screen.
for more information about login accounts.
DESCRIPTION
Enter your username of the system account.
Type your new system password. Note that as you type a password, the screen displays as
dot (.) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the LTE3202-M430.
Click Reset to reload the previous configuration for this screen.
LTE3202-M430 User's Guide
90