Table 23: Ac Power Cord Specifications - Juniper ACX1000 Hardware Manual

ACX1000 and ACX1100 Universal Access Router Hardware Guide

Table 23: AC Power Cord Specifications

Country Model Number
Australia CBL-GP-C15-AU
China CBL-GP-C15-CH
Europe (except Italy, CBL-GP-C15-EU
Switzerland, and
United Kingdom)
Italy CBL-GP-C15-IT
Japan CBL-GP-C15-JP
Korea CBL-GP-C15-KR
Switzerland CBL-GP-C15-SZ
North America CBL-GP-C15-US
United Kingdom CBL-GP-C15-UK
62
Table 23 on page 62 provides specifications on the AC power cord provided for each
country or region.
Electrical Specification
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 15 A, 50 Hz or 60 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 13 A, 60 Hz
250 VAC, 10 A, 50 Hz
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
NOTE: In North America, AC power cords must not exceed approximately
14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code
(CEC) Section 4-010(3). You can order AC power cords that are in compliance.
Plug Type Design Standard
SAA/3 AS/NZZS 3112-2000
PRC/3 GB2099, GB1002
VIIG CEE (7) VII
I/3G CEI 23–16
498GJ JIS 8303
VIIG CEE (7) VII
12G SEV 1011 / 6534-2
498G NEMA 5-15
BS89/13 BS 1363/A
Copyright © 2017, Juniper Networks, Inc.