Installing The Router; Installing The Acx1000 Or Acx1100 Mounting Brackets; Figure 18: Installing The Mounting Brackets To The Front Of The Acx1000 Or - Juniper ACX1000 Hardware Manual

CHAPTER 15

Installing the Router

Installing the ACX1000 or ACX1100 Mounting Brackets

Copyright © 2017, Juniper Networks, Inc.
Installing the ACX1000 or ACX1100 Mounting Brackets on page 85
Installing the ACX1000 or ACX1100 Router in the Rack on page 86
To attach the mounting brackets, you need the following tools:
Phillips (+) screwdriver, number 2
Two mounting brackets for front or rear mounting ship with the router (see
Figure 18 on page 85 and Figure 19 on page
To attach both mounting brackets to either the front or rear of the chassis:
Align the bracket with the two sets of mounting holes.
1.
Insert the four screws at the top and bottom of the bracket, and tighten each partially.
2.
Tighten the four screws completely.
3.
Repeat the procedure for the other bracket.
4.
Figure 18: Installing the Mounting Brackets to the Front of the ACX1000
or ACX1100 Router
86).
85